Fast penetration measurements are easier when the probe is slim enough to enter the medium with minimal resistance. This waterproof alarm thermometer combines a compact handheld device with a permanently connected extra-thin insertion probe for precise, instantaneous temperature checks in food, soft plastic materials and bulk material.
The fixed Pt1000 probe measures from -70.0 ... +250.0 °C and uses a 100 mm, Ø 1.5 mm V4A sensor with 1 m cable. Its response time of t90 <2 s in water at 0.4 m/s helps users capture changes quickly, while device accuracy of ±0.1 K ±1 digit from -20 ... +100 °C supports dependable routine checks.
The break-proof ABS housing is built for mobile use and protected to ingress protection (IP) IP65 / IP67. A 3-line backlit LCD, min/max memory, hold function and optical/acoustic alarm make measured values clear at the point of use. Two AA batteries provide more than 5000 hours of operation without backlighting.
The device includes a permanently connected Pt1000 insertion probe with V4A construction, 100 mm length, Ø 1.5 mm diameter and 1 m cable.
The segment LCD shows the measured value with additional symbols and battery status. The white backlight has an adjustable lighting duration.
The configuration menu includes alarm modes with text insertion, acoustic signal and flashing background lighting. Minimum and maximum alarm limits can be set.
Min/max memory records the lowest and highest measured values. The hold function freezes the displayed value during operation.
Zero point correction and gradient correction can be used to adjust the temperature input. Changed factory settings are indicated when the device is switched on.
The device operates with two AA batteries and includes configurable auto-power-off. A 4-stage battery indicator shows battery status.
| Number of analog inputs |
1
|
|---|---|
| Temperature inputs |
1
|
| Accuracy temperature |
±0.2 % OR ±0.1 °C
|
| Resolution temperature |
0.1 °C
|
| Measuring principle |
RTD
|
| Temperature range |
-70...+250 °C (-94...+482 °F)
|
| Temperature sensor |
Pt1000
|
| Operating temperature |
-20...+50 °C
|
|---|---|
| Operating relative humidity |
0...95 %RH
|
| Condensation |
not permitted
|
| Storage temperature |
-20...+70 °C
|
| Degree of protection case |
IP65, IP67
|
| Dimensions |
108 mm x 54 mm x 28 mm
|
|---|---|
| Materials |
ABS, Polyester, Case/housing: break-proof ABS, front panel: polyester
|
| Weight |
130 g
|
| Battery life |
5000 h
|
|---|---|
| Battery life description |
approx. 5000 h typ. continuous operation
|
| Battery type |
Battery 2x AA alkaline
|
| Power consumption |
0.4 mA, approx. 2 mA with backlight
|
| Cable |
1 m Fixed cable, Silicon 2-wire
|
|---|---|
| Probe Diameter |
1.5 mm
|
| Probe length |
100 mm
|
| Material |
AISI 316 stainless steel
|
| Type |
insertion probe
|
| Display presence |
Yes
|
|---|---|
| Description |
3-line with battery status indicator, Backlight, protected by shatterproof screen, overhead display at the push of a button
|
| Number of controls |
4
|
| Type of controls |
4 Button
|
| Display type |
LCD backlit
|
| Certificate |
CE Declaration: Declaration of conformity required where applicable under EU legislation. Manufacturers declaration, nessasary for selling to european market. Requires -prodcut depending-, fulfillment of regulation, like RoHs, LVD, EMC, ATEX, product related |
|---|---|
| Standard / Compliance |
RoHS: Restriction of Hazardous Substances compliance. Manufacturers declaration of compliance to regulation, company/site related REACH: Compliance with REACH requirements for substances and SVHC information. Manufacturers declaration of compliance to regulation, company/site related |
| Compliance Requirement |
EMC directive: Electromagnetic Compatibility |