It ensures compliance with ISO 14644 standards using laser scattering technology to detect and classify particles by size.

Reliable & Maintenance-Free
Built for long-term stability, PMsenseCR offers fast response, high sensitivity, and extended operating life—no routine maintenance required.

Optional CO₂ Sensing
Add an integrated CO₂ sensor for comprehensive indoor monitoring.

Flexible Operation & Output
Choose between continuous or cyclic measurement modes to optimize sensor lifespan. Supports RS485 MODBUS-RTU/ASCII and 4…20 mA outputs, with five measurement channels:

• Ch.1: >0.3μm

• Ch.2: >0.5μm

• Ch.3: >1.0μm

• Ch.4: >2.5μm

• Ch.5: >5.0μm

PMBsenseCR-A; PMBsenseCR-M; PMsenseCR-A; PMsenseCR-M;

The post PMsenseCR – PM and CO2 Transmitter appeared first on Senseca.

The dust particles concentration is measured using the laser scattering principle.

The transmitter is maintenance-free and has fast response, high sensitivity and an excellent stability.

The PM sensor can be operated in two ways:

• Continuous operating mode: the sensor is always active and measurements are continuously taken. In this mode at least 10,000 hours of PM sensor life are guaranteed.
• Discontinuous operating mode (default): the sensor is activated at regular intervals, when measurements has to be taken. This mode increases the PM sensor life.

On request, an optional CO₂ sensor can be integrated in the trasmitter.

The transmitter can be supplied with up to 2 optional configurable 4…20 mA, 0…5 V or 0…10 V analog outputs.

More background information on why to measure Particulate Matter (PM) can be found here.

The post PMsense – Particulate Matter Transmitter appeared first on Senseca.

The probe measures the carbon monoxide concentration in air. Together with the HD320B2 probe, the HD320A2 probe allows analyzing and monitoring the air quality in internal environments and detecting any loss of CO.
The sensor for the measurement of CO consists of an electrochemical cell with two electrodes.

Measuring range 0 ÷ 500 ppm.

Cable length 2m equipped with SICRAM module.

The probe is calibrated by the company and, usually, doesn’t request any intervention by the user.

A magnetic support (HD320AS2) can be used for fixing the probe HD320A2 to the housing of probe HD320B2.

The post HD320A2 – CO Carbon Monoxide Probe appeared first on Senseca.

The probe measures the carbon dioxide concentration in air. It’s indicated for checking and monitoring the indoor air quality. Typical applications are the check of the air quality in all the buildings where there is a crowd of people (schools, hospitals, auditoria, canteens, etc.), in the working places to optimize the comfort. CO₂ measurement is obtained with an infrared special sensor (NDIR technology: Non-Dispersive Infrared Technology) that, thanks to the use of a double filter and a special measurement technique, warranties precise, stable and long-term measurements. The air to check is spread inside the measurement chamber through the protection membrane placed at the top of the probe.

Measuring range 0 ÷ 5000 ppm. Cable length 2m equipped with SICRAM module.

The probe is calibrated by the company and usually doesn’t request any intervention by the user.

See also HD320A2 for CO measurement.

A magnetic support (HD320AS2) can be used for fixing the probe HD320A2 to the housing of probe HD320B2.

The post HD320B2 – CO2 Carbon Dioxide Probe appeared first on Senseca.

The instrument is powered directly by the USB port of the PC.

The post RS45 – Serial Connection Cable appeared first on Senseca.

The post HD37.36 – Kit Connection Tube for Calibration appeared first on Senseca.

The post HD37.37 – Kit Connection Tube for Calibration appeared first on Senseca.

The instrument measures the quantities: airspeed, temperature, relative humidity, atmospheric pressure, CO₂ (Carbon Dioxide) and CO (Carbon Monoxide) by using P37AB147 probe.

The SICRAM hotwire air speed probes, vane air speed probes, temperature probes, relative humidity and temperature combined probes can also be connected to the instrument.

Memory capacity of 67,600 records for each of the two inputs. Logging interval from 15 seconds to 1 hour.

The kit consists of: HD37AB1347 instrument, 4 rechargeable 1.2 V AA NiMH batteries, instruction manual, carrying case and Deltalog9 software downloadable here.

Probes and cables must be ordered separately.

The post HD37AB1347 – Datalogger for IAQ Analysis appeared first on Senseca.

To be used in combination with HD37AB1347 for anlaysis of Indoor Air Quality.

Probe dimensions: 275mm x 45mm x 40mm. Connection cable length 2m.

The post P37AB147 – Combined Probe for IAQ appeared first on Senseca.

•  Temperature
• Relative humidity
• Atmospheric and differential pressure
•  Air speed
• Illuminance (lux) and Irradiance
• Carbon dioxide (CO₂) – Air Quality
• Direct voltage (VP473 module) and current (IP472 module)

Sampling speed one per second each channel. Storage capacity 32,000 samples per channel.

Functions: CLOCK, HOLD, RELATIVE, DIFFERENCE, MINIMUM, MAXIMUM, AVERAGE. Simultaneous display of three measurements. Calibration of the individual probes with permanent storage of the calibration data inside the probe: probes can be changed without losing the calibration.

The instrument allows the input of various types of probe of different physical quantities. Platinum probes (25, 100, 500 Ω at 0 °C), Thermocouples K, J, E, T, N, R, S, B probes, combined R.H. and temperature, pressure also barometric one, air velocity, light, CO_{2 ,} mV and mA probes can be connected.

Centesimal temperature measurements can be carried out by PRT sensors in the range –200…+350°C, and decimal in the range +350…+850 °C.

The post HD31 – Handheld Portable Multifunction Data Logger appeared first on Senseca.