It is provided with levelling device and three feet, the height of two of the feet is adjustable. The support has a cavity on the bottom side with a M4 threaded hole. On the top side there is a 10-32 UNF threaded hole for the accelerometer mounting. A cubic adapter, to be fixed on the top side of the support, allows to mount three mono axial accelerometers orientated along orthogonal axes.

Material: nickel-plated steel, weight 1.9 kg.

The adapter can be used with all the accelerometers.

It includes:

• Steel support with three feet and levelling device. The support has a 10-32 UNF threaded hole on the top side and a cavity on the bottom side with a M4 threaded hole;
• Cubic adapter to be mounted on the support top side with two M4 screws (included). The cube is provided with 10-32 UNF threaded holes on three orthogonal faces;
• 3 mm hex key.

The post HD2030AC5 – Floor Adapter for Seismic Accelerometers appeared first on Senseca.

The adapter, inserted between the hand and the handle, is pushed against the handle by the hand itself. The accelerometer is placed in central position between the middle-finger and the ring-finger or between the forefinger and the middle-finger.

Suitable for anatomical handles even if not cylindrical or with small dimensions.

Material: light alloy.
It includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key;
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key;
• 10 cable-ties, width 4.5 mm, length 200 mm;
• 2 velcro straps, width 25 mm, length 300 mm (HD2030FV).

The post HD2030AC4 – T-Shaped Hand-Arm Adapter appeared first on Senseca.

The adapter, inserted between the hand and the handle, is pushed against the handle by the hand itself. Because the accelerometer is placed in a lateral position, the measurement must be repeated placing the accelerometer both on the right and left side of the hand. Suitable for large cylindrical handles.

Provided with 10-32 UNF fixing hole for the mounting of the accelerometer.

Material: inox.

It includes:

• 10 cable-ties, width 4.5 mm, length 200 mm;
• 2 velcro straps, width 25 mm, length 300 mm (HD2030FV).

The post HD2030AC3 – Cylindrical Handles Hand Arm Adapter appeared first on Senseca.

The adapter has to be fastened with plastic cable-tie or metallic clamp close to the handle holding hand.

Suitable for anatomical handles and small size tools, where the weight and dimensions of the measurement chain must be minimized.

Material: light alloy.

It includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key;
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key;
• 10 cable-ties, width 4.5 mm, length 200 mm;
• 1 metallic clamp, width 9 mm.

The post HD2030AC1 – Cube Shaped Hand-Arm Adapter appeared first on Senseca.

The adapter, inserted between the hand and the handle, is pushed against the handle by the hand itself.

Because the accelerometer is placed in a lateral position, the measurement must be repeated placing the accelerometer both on the right and left side of the hand. Suitable for large cylindrical handles.

Material: light alloy.
It includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key;
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key;
• 10 cable-ties, width 4.5 mm, length 200 mm;
• 2 velcro straps, width 25 mm, length 300 mm (HD2030FV).

The post HD2030AC2 – Cylindrical Handles Hand Arm Adapter appeared first on Senseca.