The kit is composed of instrument, four AA 1.5 V batteries, instruction manual. The probes and cables have to be ordered separately.

The probes necessary for WBGT measurement are the following:

• Dry bulb temperature probes TP3207.
• Globe temperature probe TP3275.
• Natural ventilation wet bulb temperature probe HP3201 or TP3204S.

The probes necessary for PMV and PPD measurement are the following:

• Relative humidity and temperature combined probe HP3217R.
• Omnidirectional hotwire probe AP3203.
• Globe temperature probe TP3275.

The post HD32.3A – Data Logger for WBGT, PMW, PPD Measurement appeared first on Senseca.

Probe stem Ø 16 mm, length 250 mm. Cable length 2 metres. Equipped with SICRAM module.

Measuring range 0 °C…+60 °C.

The probe is used in combination with the thermal microclimate data logger HD32.1 for the evaluation of dissatisfied people due to radiant asymmetry.

On request, LPNET07 ISO calibration report (VCERT-L26).

The post TP3207TR – Radiant Temperature Probe appeared first on Senseca.

Equipped with SICRAM module, two spare cotton wicks and 50 cc distilled water.

Measuring range +4 °C…+80 °C.

Used for measuring WBGT with the data loggers HD32.1, HD32.2A and HD32.3TCA.

On request, 4 fixed points temperature ISO 17025 certificate (VACCREDIA-U9).

The post HP3201 – Natural Ventilation Wet Bulb Probe appeared first on Senseca.

Probe stem Ø 14 mm, length 110 mm. Cable length 2 metres. Equipped with double SICRAM module, spare cotton wick and 50 cc distilled water.

Measuring range +4 °C…+80 °C.

On request 2 temperature ISO 17025 certificates, one for each probe, at 4 fixed points (VACCREDIA-U9).

The post HP3217DM – Double Probe for Thermal Comfort appeared first on Senseca.

The instrument is provided with three inputs for probes with SICRAM module: the probes have an electric circuit that communicates with the instrument; the sensor calibration data are saved in its permanent memory. All the SICRAM probes can be inserted in one of the inputs: they are automatically recognized when you switch the instrument on.
The main features of the instrument are:

• Logging: acquisition and memorization of data inside the instrument. Memory capacity: 64 different logging sections, with the possibility to set the acquisition interval of the samples. You can set the duration of the memorization and, with auto-start function; it’s possible to set the starting and finishing date and the hour of data memorization.
• The measurement unit of the temperature visualized sizes: °C, °F, °K.
• The system date and hour.
• The visualization of the maximum, minimum and medium statistic parameters and their cancellation.
• The transfer speed of the data through the serial port RS232.

HD32.2 instrument can contemporarily detect the following sizes:

• Globe thermometer temperature Tg.
• Wet bulb with natural ventilation temperature Tn.
• Ambient temperature T.

On the basis of the detected measurements, HD32.2 can calculate:

•  WBGT(in) index (Wet Bulb Glob Temperature: wet bulb and globe thermometer temperature) in presence or absence of solar irradiation.
•  WBGT(out) index (Wet Bulb Glob Temperature: wet bulb and globe thermometer temperature) in presence of solar irradiation.

These probes are requested for the WBGT measurement:

• Dry bulb temperature probe TP3207.2.
• Globe temperature probe TP3276.2.
• Natural ventilated wet bulb temperature probe HP3201.2.

HD32.2 is the portable version, mostly used in combination with a table stand (small tripod). For measurements during a longer period we suggest the version with a stable tripod HD32.3A.

The post HD32.2 – WBGT Index Measurement appeared first on Senseca.

Measuring range -30 °C…+120 °C.

With the Thermal Comfort data logger HD32.1, the probe is used for  the measurement of following indexes:

• Mean radiant temperature: in combination with Air temperature  probe and hot-wire probe for wind speed.
• WBGT: in combination with natural ventilation wet bulb temperature probe and dry bulb temperature probe.

On request, 4 fixed points temperature ISO 17025 certificate (VACCREDIA-U9).

Available as well only globe Ø 50 mm as spare part (code: TP876S)

The post TP3276 – Globe Temperature Probe appeared first on Senseca.

Stem diameter Ø 14 mm, length 500 mm. Cable length 2 metres. Equipped with double SICRAM module and extension shaft Ø 14 mm, length 450 mm TP3227.2.

Measuring range -10 °C…+100 °C.

The probe is used for measuring local discomfort due to vertical thermal gradient  with the HD32.1 Thermal Comfort data logger. It can be used for studying subjects standing or sitting. The height of one probe can be regulated.

On request 2 temperature ISO 17025 certificates, one for each probe, at 4 fixed points (VACCREDIA-UT4).

The post TP3227K – Local Discomfort Temperature Probe appeared first on Senseca.

Measuring range -10 °C…+100 °C.

The probe is used for measuring local discomfort due to vertical thermal gradient with the data logger HD32.1.

On request 2 temperature ISO 17025 certificates, one for each probe, at 4 fixed points (VACCREDIA-U9).

The post TP3227PC – Local Discomfort Temperature Probe appeared first on Senseca.

HD32.3TC is the portable version, mostly used in combination with a table stand (small tripod).
HD32.3TCA is the version that is being used with a stable tripod, suitable to be used for measurements during a longer period.

Technically the difference is simple: with the HD32.3TCA the sensors are being connected by a cable and a black globe of 150mm is used. With the HD32.3TC the black globe is 50mm and the sensors are being connected directly on top of the instrument.

Both are fully according to the applicable ISO7730, ISO7726 and ISO7243 regulations.

• T dry bulb temperature
• T_nw natural ventilation wet bulb temperature
• T_g globe thermometer temperature
• UR relative humidity
• V_a air speed
• CO₂ carbon dioxide
• P_atm atmospheric pressure
• PM1.0, PM2.5, PM10 particulate matter

A bright and clear touch display allows the calculated values for WBGT, PMV/PPD and TU to be directly visible. The data are immediately available via “cloud” application accessible remotely via Wi-Fi connection. The data logger has a large memory capacity for long lasting measurement cycles. Moreover, the rechargeable battery guarantees a working autonomy of at least 24 hours.

Reference standard: ISO 7726 –  Ergonomics of the thermal environment – Instruments for measuring physical quantities. ISO 7730 –  Ergonomics of the thermal environment – Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. ISO 7243 – Ergonomics of the thermal environment – Assessment of heat stress using the WBGT (wet bulb globe temperature) index. ASHRAE Standard 55 – Thermal Environmental Conditions for Human Occupancy. ASHRAE Standard 62.1-2019 – Ventilation for Acceptable Indoor Air Quality. ASHRAE Standard 62.1-2019 – Ventilation for Acceptable Indoor Air Quality.

The HD32.3TC and HD32.3TCA have additional possibilities compared to the HD32.3 and HD32.3A instruments – sale, repair and maintenance for the old series will of course stay available.

The post HD32.3TC – HD32.3TCA – Thermal Microclimate PMV-PPD / WBGT appeared first on Senseca.