Datasheet can still be found on ‘download’.

For the rest of the series, please refer to HD9008… – HD9009… dedicated page.

The post HD9008T17S – Meteorological Temperature and RH Transmitter appeared first on Senseca.

• Meteorology/Renewable energies: sensor with conformal coating for protection against condensation, contaminants, and salt.
• HVAC/Indoor: cost-efficient for general indoor use.
• Clean Rooms/High performance: for indoor environments when high reliability and robustness are key factors.

Particularly suitable for OEM applications, it can be used in combination with any Modbus-RTU master device via its M12 connector. Two optional additional 0…1 V, 0…5 V or 0…10 V (depending on model) analog outputs, with configurable temperature and relative humidity or dew point ranges.

Transmitters are factory-calibrated in multiple points for relative humidity. Upon request, ISO/IEC 17025 calibration certificate.

ETS60M00; ETS60M0B; ETS60M90; ETS60M9B; ETS60MW0; ETS60MWB; ETS60MX0; ETS60MXB; ETS60MY0; ETS60MYB; ETS68M00; ETS68M0B; ETS68M90; ETS68M9B; ETS68MW0; ETS68MWB; ETS68MX0; ETS68MXB; ETS68MY0; ETS68MYB; ETS80M00; ETS80M0B; ETS80M90; ETS80M9B; ETS80MW0; ETS80MWB; ETS80MX0; ETS80MXB; ETS80MY0; ETS80MYB

The post ENVIROsense – Temperature, RH and Barometric Pressure Transmitters appeared first on Senseca.

The models of the HD48.. series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20mA) or voltage (0…10V) outputs, or a serial RS485 output*, depending on the model.

Available models:

1. horizontal probe for duct mounting (TO),
2. vertical probe for wall mounting (TV),
3. probe with 2 or 5 m cable (TC),
4. fixed contact Pt100 probe for solar panel (TFP)

For the TO and TC versions, two probe temperature ranges are possible: standard -20…+80 °C and extended -40…+150 °C (option E). Temperature range of the thin film 1/3 DIN Pt100 probe for solar panel: -40…+85 °C.

Also available with LCD display (option L). Electronics working temperature: -20…+60 °C.

For Passive Transmitters, please refer to the HD49… series.

HD4877T012 , HD4807TTV , HD4807TTO1 , HD4807TTO2 , HD4807TTC1.2 , HD4807TTC1.5 , HD4807TTC2.2 , HD4807TTC2.5 , HD4807TE , HD4807TL , HD48V07TTV , HD48V07TTO1 , HD48V07TTO2 , HD48V07TTC1,2 , HD48V07TTC1,5 , HD48V07TTC2,2 , HD48V07TTC2.5 , HD48V07TE , HD48V07TL , HD48S07TTV , HD48S07TTO1 , HD48S07TTO2 , HD48S07TTC1.2 , HD48S07TTC1.5 , HD48S07TTC2.2 , HD48S07TTC2.5 , HD48S07TE , HD48S07TL , HD4801TTV , HD4801TTO1 , HD4801TTO2 , HD4801TTC1.2 , HD4801TTC1.5 , HD4801TTC1.10 , HD4801TTC2.2 , HD4801TTC2.5 , HD4801TTC2.10 , HD4801TE , HD4801TL , HD48V01TTV , HD48V01TTO1 , HD48V01TTO2 , HD48V01TTC1.2 , HD48V01TTC1.5 , HD48V01TTC1.10 , HD48V01TTC2.2 , HD48V01TTC2.5 , HD48V01TTC2.10 , HD48V01TE , HD48V01TL , HD48S01TTV , HD48S01TTO1 , HD48S01TT02 , HD48S01TTC1.2 , HD48S01TTC1.5 , HD48S01TTC1.10 , HD48S01TTC2.2 , HD48S01TTC2.5 , HD48S01TTC2.10 , HD48S01TE , HD48S01TL , HD4817TV , HD4817TO1 , HD4817TO2 , HD4817TC1.2 , HD4817TC1.5 , HD4817TC1.10 , HD4817TC2.2 , HD4817TC2.5 , HD4817TC2.10 , HD48V17TV , HD48V17TO1 , HD48V17TO2 , HD48V17TC1.2 , HD48V17TC1.5 , HD48V17TC1.10 , HD48V17TC2.2 , HD48V17TC2.5 , HD48V17TC2.10 , HD48V17TE , HD48V17TL , HD48S17TTV , HD48S17TTO1 , HD48S17TTO2 , HD48S17TTC1.2 , HD48S17TTC1.5 , HD48S17TTC1.10 , HD48S17TTC2.2 , HD48S17TTC2.5 , HD48S17TTC2.10 , HD48S17TE , HD48S17TL , HD4877TO1 , HD4877TTO2 , HD4877TTC1.2 , HD4877TTC1.5 , HD4877TTC1.10 , HD4877TTC2.2 , HD4877TTC2.5 , HD4877TTC2.10 , HD48V77TTO1 , HD48V77TTO2 , HD48V77TTC1.2 , HD48V77TTC1.5 , HD48V77TTC1.10 , HD48V77TTC2.2 , HD48V77TTC2.5 , HD48V77TTC2.10 , HD48V77TL , HD48S77TTO1 , HD48S77TTO2 , HD48S77TTC1.2 , HD48S77TTC1.5 , HD48S77TTC1.10 , HD48S77TTC2.2 , HD48S77TTC2.5 , HD48S77TTC2.10 , HD48S77TL , HD48TCAL , HD48STCAL , HD4817TC12 , HD4817TC15 , HD4817TC110 , HD4877T480.1 , HD48V77T480.1 , HD48S77T480.1 , HD4817CAL , HD4817TETO1 , HD4817TO1L , HD4877TETO1 , HD4877TO1l , HD4817TETC110L

The post HD48… Series – Active Temperature-Humidty Transmitters appeared first on Senseca.

The models of the HD49.. series are passive transmitters and thus suitable to be inserted in a 4…20mA current loop.

Available models:

• horizontal probe for duct mounting (TO),
• vertical probe for wall mounting (TV),
• probe with 2 or 5 m cable (TC),
• fixed contact Pt100 probe for solar panel (TFP)

For the TO and TC versions, two probe temperature ranges are possible: standard -20…+80 °C and extended -40…+150 °C (option E). Temperature range of the thin film 1/3 DIN Pt100 probe for solar panel: -40…+85 °C.

HD49 transmitters are also available with LCD display (option L).

Electronic working temperature: -20…+60 °C.

For Active Transmitters, please refer to the HD48… series.

HD4907ETC1.10 , HD4907ETC1.10L , HD4907ETC1.2 , HD4907ETC1.2L , HD4907ETC1.5 , HD4907ETC1.5L , HD4907ETC2.10 , HD4907ETC2.10L , HD4907ETC2.2 , HD4907ETC2.2L , HD4907ETC2.5 , HD4907ETC2.5L , HD4907ETO1 , HD4907ETO1L , HD4907ETO2 , HD4907ETO2L , HD4907ETV , HD4907ETVL , HD4907TC1.10 , HD4907TC1.10L , HD4907TC1.2 , HD4907TC1.2L , HD4907TC1.5 , HD4907TC1.5L , HD4907TC2.10 , HD4907TC2.10L , HD4907TC2.2 , HD4907TC2.2L , HD4907TC2.5 , HD4907TC2.5L , HD4907TFP.3 , HD4907TFP.3L , HD4907TO1 , HD4907TO1L , HD4907TO2 , HD4907TO2L , HD4907TV , HD4907TVL , HD4917ETC1.10 , HD4917ETC1.10L , HD4917ETC1.2 , HD4917ETC1.2L , HD4917ETC1.5 , HD4917ETC1.5L , HD4917ETC2.10 , HD4917ETC2.10L , HD4917ETC2.2 , HD4917ETC2.2L , HD4917ETC2.5 , HD4917ETC2.5L , HD4917ETO1 , HD4917ETO1L , HD4917ETO2 , HD4917ETO2L , HD4917ETV , HD4917ETVL , HD4917TC1.10 , HD4917TC1.10L , HD4917TC1.2 , HD4917TC1.2L , HD4917TC1.5 , HD4917TC1.5L , HD4917TC2.10 , HD4917TC2.10L , HD4917TC2.2 , HD4917TC2.2L , HD4917TC2.5 , HD4917TC2.5L , HD4917TO1 , HD4917TO1L , HD4917TO2 , HD4917TO2L , HD4917TV , HD4917TVL , HD4977TC1.10 , HD4977TC1.10L , HD4977TC1.2 , HD4977TC1.2L , HD4977TC1.5 , HD4977TC1.5L , HD4977TC2.10 , HD4977TC2.10L , HD4977TC2.2 , HD4977TC2.2L , HD4977TC2.5 , HD4977TC2.5L , HD4977TO1 , HD4977TO1L , HD4977TO2 , HD4977TO2L

The post HD49… Series – Passive Temperature-Humidity Transmitters appeared first on Senseca.

Stem length 130 mm. (Supplied with P8 filter).

The post S.TV – Vertical Probe Temperature – RH appeared first on Senseca.

Stem lenght 135 mm (S.TC1…) or 335 mm (S.TC2…).

Stem material depending on the model:

• AISI 304, filter P7 , max 150 °C
• HT = AISI 304, filter P6, max 170 °C
• P = PBT technopolymer

Cable length:

• 2 m (S.TC1.2 /S.TC1.2P/S.TC1.2HT/ S.TC2.2 /S.TC2.2P/S.TC2.2HT);
• 5 m (S.TC1.5 /S.TC1.5P/S.TC1.5HT / S.TC2.5/S.TC2.5P/S.TC2.5HT);
• 10 m (S.TC1.10 /S.TC1.10P/S.TC1.10HT / S.TC2.10/S.TC2.10P/S.TC2.10HT).

The post S.TC series – Interchangeable Temperature Humidity Probes appeared first on Senseca.

Available lenghts: 2 m (PW), 5 m (PW5), 10 m  (PW10).

The post PW – K Thermocouple Extension Cable appeared first on Senseca.

It measures relative humidity and temperature using combined temperature and humidity probes. Temperature only is measured by immersion, penetration, air or contact probes. The sensor can be a Pt100 or Pt1000. When the humidity/temperature combined probe is connected, the instrument calculates and displays the absolute humidity, the dew point, the partial vapour pressure.

The probes are fitted with an automatic detection module, with the factory calibration data already stored inside.

The Max, Min and Avg function calculate the maximum, minimum, and average values. Other Functions: REL, HOLD and auto power off which can be disabled. The instruments have IP67 protection degree.

Complete with carrying case, instruction manual, 3 batteries.

The combined humidity and temperature probes complete with SICRAM module HP… series have to be ordered separately. TP47…series temperature probes can be connected.

The post HD2301.0 – Handheld Thermo-Hygrometer appeared first on Senseca.

It measures relative humidity and temperature with combined probes or temperature alone with immersion, penetration, contact or air Pt100 or Pt1000 probes.

When the combined humidity/temperature probe is connected, the instrument calculates and displays absolute humidity, dew point, partial vapour pressure, wet bulb temperature, mixing ratio, enthalpy, comfort indices.

The probes are equipped with an automatic recognition module: they have factory calibration data stored in them.

The HD2101.2 instrument is a datalogger, storing up to 38,000 samples that can be transferred to a PC connected to the instrument via the RS232C and USB 2.0 serial ports or to a portable printer. Storage interval, printing, baud rate can be configured from the menu. The Max, Min and Avg function calculates the maximum, minimum and average values. Other functions are: REL relative measurement, HOLD function and automatic switch-off (excludable).

Combined humidity and temperature probes with SICRAM module must be ordered separately. For temperature only, it uses TP47 series temperature probes.

Available as well without data logging function HD2101.1.

The post HD2101.2 – Thermo Hygrometer Data Logger appeared first on Senseca.

It can be connected to 3-wire or 4-wire Pt100Ω platinum tempera-ture probes.

Assembling and calibration only in Senseca.

The post TP471 – SICRAM Electronic Module appeared first on Senseca.