Clean Room Archives - Senseca https://environmental.senseca.com/product-tag/clean-room/ Member of GHM GROUP Mon, 29 Dec 2025 17:49:13 +0000 en-US hourly 1 https://wordpress.org/?v=6.3.7 https://environmental.senseca.com/wp-content/uploads/2023/12/favicon-senseca-180x180-1-100x100.png Clean Room Archives - Senseca https://environmental.senseca.com/product-tag/clean-room/ 32 32 PMsenseCR – PM and CO2 Transmitter https://environmental.senseca.com/product/pmsensecr-pm-and-co2-transmitter/ Sun, 30 Mar 2025 13:34:56 +0000 https://environmental.senseca.com/?post_type=product&p=16315 Precise meausurement of Particulate Matter and CO2 for expert environments.

The post PMsenseCR – PM and CO2 Transmitter appeared first on Senseca.

]]> PMsenseCR is a PM and optionally CO2 transmitter, ideal for pharmaceutical and high-tech cleanrooms where contamination control is critical.

It ensures compliance with ISO 14644 standards using laser scattering technology to detect and classify particles by size.

Reliable & Maintenance-Free
Built for long-term stability, PMsenseCR offers fast response, high sensitivity, and extended operating life—no routine maintenance required.

Optional CO₂ Sensing
Add an integrated CO₂ sensor for comprehensive indoor monitoring.

Flexible Operation & Output
Choose between continuous or cyclic measurement modes to optimize sensor lifespan. Supports RS485 MODBUS-RTU/ASCII and 4…20 mA outputs, with five measurement channels:

  • Ch.1: >0.3μm

  • Ch.2: >0.5μm

  • Ch.3: >1.0μm

  • Ch.4: >2.5μm

  • Ch.5: >5.0μm

 

The post PMsenseCR – PM and CO2 Transmitter appeared first on Senseca.

]]> HD50CR – Clean Room Logger Transmitter https://environmental.senseca.com/product/hd50cr-clean-room-logger-transmitter/ Tue, 31 Mar 2020 08:39:37 +0000 https://www.deltaohm.com/?post_type=product&p=10812 Relative or differential low pressure transmitter and data logger designed for wall flush-mounting

The post HD50CR – Clean Room Logger Transmitter appeared first on Senseca.

]]> The HD50CR is the ideal solution for monitoring of differential pressure, temperature and humidity in Clean Room applications.

A low pressure sensor with high accuracy and stability and auto-zeroing feature ensure high accuracy and stability over the time.

Three 0…5/10 V and 0/4…20 mA analog outputs and a digital RS485 output with “Slave” Modbus-RTU protocol allow connecting the instrument to a network of sensors are available. The instrument can also be connected to a local network via the Ethernet interface (optionally Wi-Fi, on request). The simultaneous operation of two communication protocols (proprietary and Modbus TCP/IP) is possible. The instrument manages up to 10 “TCP/IP Client” simultaneously. If the local network is connected to Internet, the data can be regularly sent to an FTP address, to the Cloud and via e-mail.

The instrument is also available in a version with only the 3 analogue outputs and the RS485 digital output, with decimal resolution. Click here for the HD50CR-AS dedicated manual.

Configuring the instrument is very simple: if both connected to the same network, this can be done through any device that has been granted access to the instruments webserver.

For each detected quantity, two alarm thresholds can be set by the user. Exceeding a threshold is signaled by direct alarms.

For specific FDA regulations that can apply in the Pharmaceutical industry, we can provide optional modules to our standard HD35AP-S and HDServer1 software to fully operate conform 21 CFR part 11 regulations.

The HD50CR provides the ideal solution for the application, keeping track of any out of range values and providing the perfect evidence for any quality audit. The stainless steel flush-mounted style guarantees that the instrument is easy to clean.

The post HD50CR – Clean Room Logger Transmitter appeared first on Senseca.

]]>