Selected product option for Digital pressure probes for differential and absolute pressure. All information below applies to the selected product option.
Absolute pressure measurements in portable work benefit from a probe that connects quickly, keeps its calibration data with the sensor and fits directly into the PRO-Line digital workflow. The DX 240 measures 0…200 kPa absolute pressure in air and non-aggressive dry gases for handheld pressure checks with PRO D01, PRO D05, PRO 925 and PRO 595 meters.
Temperature-compensated measurement over 0…+50 °C supports consistent readings, with typical accuracy of 0.5 % FS at 25°C. The probe is supplied factory-calibrated and ready to use, while stored calibration data allow interchangeability without recalibration.
A compact stainless-steel housing, stainless-steel port for Ø6x1 mm hoses and ingress protection (IP65) help the DX 240 stand up to regular field use. The sensor also provides Pabs, MinP, AvgP, MaxP and sea-level corrected SLP channels through the digital interface.
DX 210 probes measure differential pressure, while DX 240 probes measure absolute pressure.
A 5-pin M12 connector links the probe to compatible PRO Line handheld meters with digital inputs.
Stainless-steel ports accept Ø6x1 mm hoses with an internal diameter of Ø4 mm.
The internal measuring rate can be set to Low or High in supported handheld meters.
The probes provide last value, minimum, average and maximum channels from the sensor.
The measurement is temperature compensated across 0 to +50 °C.
Three adjustment points and an offset function are available when User calibration type is selected.
The probes are intended for air and non-aggressive dry gases only.
