Using the mounting kit (included) the accelerometer can be used in combination with both HD2030PAD seat adapter and HD2030AC5 floor measurement adapter.

• Sensitivity 1 V/g
• Range ±5 g pk
• Weight 50 g
• Threaded hole 10-32 UNF
• Connector M5 4 pin

It includes:

• Mounting Kit for HD2030PAD and HD2030AC5;
• Mounting screw 10-32 UNF copper-beryllium alloy (HD6200).

Accelerometer can be connected to the right input (tri-axial) of analyzer with cable HD2030CAB3M-xxM (not included).

The post HDWBV-100 – IEPE Triaxial Accelerometer – 1000 mV/g appeared first on Senseca.

• Sensitivity 1 V/g
• Range ±5 g pk
• Weight 25 g
• 10-32 UNF threaded hole ¼-28
• 4-pin connector

It includes:

• 10-32 UNF copper-beryllium alloy mounting screw (081B05);
• M6 copper-beryllium alloy mounting screw (M081B05);

The accelerometer is connected to the right input (tri-axial) of the analyzer through the HD2030CAB3-xxM cable (not included).

The post HDP356B18 – IEPE Triaxial Accelerometer – 1000 mV/g appeared first on Senseca.

It is provided with levelling device and three feet, the height of two of the feet is adjustable. The support has a cavity on the bottom side with a M4 threaded hole. On the top side there is a 10-32 UNF threaded hole for the accelerometer mounting. A cubic adapter, to be fixed on the top side of the support, allows to mount three mono axial accelerometers orientated along orthogonal axes.

Material: nickel-plated steel, weight 1.9 kg.

The adapter can be used with all the accelerometers.

It includes:

• Steel support with three feet and levelling device. The support has a 10-32 UNF threaded hole on the top side and a cavity on the bottom side with a M4 threaded hole;
• Cubic adapter to be mounted on the support top side with two M4 screws (included). The cube is provided with 10-32 UNF threaded holes on three orthogonal faces;
• 3 mm hex key.

The post HD2030AC5 – Floor Adapter for Seismic Accelerometers appeared first on Senseca.

The adapter, inserted between the hand and the handle, is pushed against the handle by the hand itself. The accelerometer is placed in central position between the middle-finger and the ring-finger or between the forefinger and the middle-finger.

Suitable for anatomical handles even if not cylindrical or with small dimensions.

Material: light alloy.
It includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key;
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key;
• 10 cable-ties, width 4.5 mm, length 200 mm;
• 2 velcro straps, width 25 mm, length 300 mm (HD2030FV).

The post HD2030AC4 – T-Shaped Hand-Arm Adapter appeared first on Senseca.

The adapter, inserted between the hand and the handle, is pushed against the handle by the hand itself.

Because the accelerometer is placed in a lateral position, the measurement must be repeated placing the accelerometer both on the right and left side of the hand. Suitable for large cylindrical handles.

Material: light alloy.
It includes:

• 10-32 UNF cylindrical head with hex socket screw with 4 mm hex key;
• 5-40 UNC cylindrical head with hex socket screw with 4 mm hex key;
• 10 cable-ties, width 4.5 mm, length 200 mm;
• 2 velcro straps, width 25 mm, length 300 mm (HD2030FV).

The post HD2030AC2 – Cylindrical Handles Hand Arm Adapter appeared first on Senseca.

The mechanical design is compliant with the requirements of ISO 10326-1. The seat pad consists of a thin circular rubber pad housing a low profile tri-axial accelerometer.

The accelerometer is suitable for the measurement of human exposure to whole-body vibrations, according to ISO 2631, ISO 10326-1, ISO 7096 and ISO 8041.

The transducer is based on MEMS technology and the electrical interface is IEPE/ICP compatible for reliable signal transmission.
The device measures the acceleration imparted to the body in three orthogonal axes with a sensitivity of 100 mV/(m/s²) nominally. The tri-axial accelerometer HDWBV-100, mounted at the center of the rubber pad HD2030PAD, is housed an anodized aluminum case provided with a threaded hole, suitable for sensor calibration, and a 4-pin M5 connector compatible with HD2030.CAB3M cables.

Reference markets are:

• Control of vibration risk for drivers of passenger and work vehicles
• Measurement of vibrations in the automotive industry
• Laboratory measurements

The post HD2030MSP – IEPE Triaxial Whole Body Accelerometer – 1000 mV/g appeared first on Senseca.